11
KDL-W40A12U
2-629-160-
13
(1)
Get
ting S
tar
te
d
3: Connecting an aerial/VCR
1
Connect your aerial to the
socket on the
rear of the TV.
If connecting to an aerial only
Go to step 3.
2
Connect your VCR.
1
Connect the
socket on the rear of the TV to
the input socket on your VCR with the RF
lead.
2
Connect the scart socket on your VCR to the
/
2 scart socket on the rear of the TV
with a scart lead.
3
Connect the supplied mains lead to the AC
IN socket on the rear of the TV.
Note
Do not connect the mains lead to your mains socket until
all connections are complete.
4
Bundle the cable.
\
1
Run the mains lead through the bundling band
and attach to the right of the rear panel with
the supplied screw.
2
Remove the screw to open one side of the
cable cover and run the cables through, then
tighten the screw again.
(SMART LINK)
1
2
3
IN
OUT
Coaxial cable
(supplied)
Scart lead (not supplied)
RF lead
(not supplied)
2-
1
2-
2
Mains lead
(supplied)
1
VCR
Rear of the TV
3
2
1
01GB-KLV40XUK.book Page 11 Friday, September 9, 2005 6:13 PM
