Getting Started
19
Ge
tting Started
Setting Up the Channel List – Initial Setup
After you finish connecting the TV, you can run the
Initial Setup
to create a
list of available analog and digital channels. The
Initial Setup
screen
appears when you turn on the TV for the first time after hooking it up.
1
Press
to turn on the TV.
The
Initial Setup
screen appears.
2
Press
V
/
v
to highlight the on-screen
display language. Then press
. The
message “Start auto program now?”
appears.
3
Press
V
/
v
to highlight “Yes” then press
.
Auto Program
performed through
Initial Setup
will automatically
create a list of receivable channels from both VHF/UHF antenna and
cable TV channels if both sources are connected.
To run Auto Program again at a later time
Use the
Auto Program
feature, see page 39.
✍
If you select “No” during Initial Setup, the Initial Setup screen will
reappear each time you turn on the TV until you complete Auto
Program.
