5
GB
Se
tting Up
•
Ensure that there are no objects in front of the TV.
•
Do not expose the Intelligent Presence Sensor to
direct sunlight or other strong light, as
malfunction may occur.
•
If the TV is brought directly from a cold to a warm
location, or is placed in a very damp room, or is
placed in a room in which heating has just been
turned on, moisture may condense on the surface
or inside the TV. Should this occur, turn off the
TV and leave the TV off until the moisture
evaporates, and then the TV can be used. If you
notice moisture condensation between the glass
panel and the LCD, turn on the TV and the
condensation will evaporate after the TV has
warmed up.
Connecting an antenna
(aerial)/cable/VCR
Connecting an antenna (aerial)/cable
Connecting an antenna (aerial)/cable
and VCR
~
•
When connecting an antenna (aerial) cable (not
supplied), an adaptor (not supplied) may be
required (Australian model and New Zealand
model only).
Detaching the terminal cover
~
•
After connecting cables, re-attach the terminal
cover to the TV.
Intelligent Presence Sensor
3D Sync
Transmitter
IR Sensor
Antenna (aerial) cable
(not supplied)
Antenna (aerial)
cable (not supplied)
Antenna
(aerial) cable
(not supplied)
AV cable
(not supplied)
VCR
