18
GB
KDL-46/40/32V2500
2-893-779-
22
(1)
Viewing pictures from
connected equipment
Switch on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 6)
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment
Press
/
repeatedly until the correct input
symbol (see below) appears on the screen.
Additional operations
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment other
than PC.
AV1/
AV1, AV2/
AV2:
Audio/video or RGB input signal through the scart
socket
/
1 or 2.
appears only if an RGB
source has been connected.
AV3:
Component input signal through the Y, P
B
/C
B
, P
R
/C
R
sockets
/
3, and audio input signal through the
L, R sockets
/
3.
AV4/ AV5:
Digital audio/video signal is input through the HDMI IN
4/5 socket. Audio input signal is analogue only if the
equipment has been connected using the DVI and audio
out socket.
AV6/
AV6:
Video input signal through the video socket
6, and
audio input signal through the L (MONO), R audio
sockets
6.
appears only if the equipment is
connected to the S video socket
6 instead of the
video socket
6, and S video input signal is input
through the S video socket
6.
To
Do this
Return to the normal
TV operation
Press DIGITAL or ANALOG.
Access the Input
signal index table
Press
to access the Input signal
index table. (Then, only in
analogue mode, press
g
.) To
select an input source, press
F
/
f
,
then press
.
Options
Description
Power Saving
See page 26.
Picture Mode
See page 20.
Sound Mode
See page 22.
Auto Clock Set (in
analogue mode only)
Allows you to switch to digital
mode and obtain the time.
Sleep Timer
See page 25.
i
Volume
Adjusts the volume of the
headphones.
010COV.book Page 18 Friday, January 12, 2007 9:37 AM
