11
KDL-40XBR9/46XBR9/52XBR9
KDL-40XBR9/46XBR9/52XBR9
SELF-DIAGNOSTIC FUNCTION
Self Diagnosis
Supported model
The units in this manual contain a self-diagnostic function. If an error occurs, the POWER/STANDBY LED indicator will automatically begin to fl ash.
The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the POWER/STANDBY LED fl ash indicators is
listed in the instruction manual for the user’s knowledge and reference. If an error symptom cannot be reproduced, the Remote Commander can be
used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur.
1. Diagnostic Test Indicators
When an error occurs, the POWER/STANDBY LED indicator will fl ash a set number of times to indicate the possible cause of the problem. If there is
more than one error, the indicator will identify the fi rst of the problem areas.
LED Indicators
0)#/&&4)-%2
0/7%234!.$"9
($3)'.!,
Description of LED Indictors
LED
LED COLOR
DESCRIPTION
PIC OFF/TIMER
Orange or Green
Lights up in
orange
when the Timer or Sleep Timer is
set. Lights up and/or blinks
in
orange
during a software upgrade.
Lights up in
green
when the Power Saving is set to
Picture Off.
HD SIGNAL
Orange
Lights up when the TV receives HD signal including up
converted signals.
POWER/STANDBY
Green or Red
Lights up in
red
when your TV is in PC power saving
mode or during the software upgrade. Lights up in
green
when the TV is turned on. If the LED blinks in
red
continuously, this may indicate that the TV needs
servicing.
2 times
6 times
LED ON 0.3 sec.
LED OFF 0.3 sec.
LED OFF
3 sec.
