38
GB
C:\Users\fle1\Desktop\FULLSET\SY160215_KM KL4349 PAD
IM\4685033121_GB\080ADD.fm
masterpage: Left
KDL-49W750E / 49W660E / 43W750E / 40W660E / 32W660E / 32W610E
4-685-033-
12
(1)
Reconfigure your network settings.
If the LAN cable is connected to an active server
and the TV has acquired an IP address, check your
DLNA Certified™ media server’s connections and
configurations.
Note
Your IP address configuration can be viewed by
selecting the [View Network setting and status]
option.
DLNA Certified™ media server is inaccessible
although it is listed under [Media] in the
Home Menu
Check your LAN cable/connection or your server
connections. The TV may have lost connection
with the server.
Perform [Server Diagnostics] to check if your
media server is properly communicating with the
TV. Press
HOME
, then select [Settings]
t
[System
Settings]
t
[Set-up]
t
[Network]
t
[Home
Network Setup]
t
[Server Diagnostics].
When using the renderer function, music files
cannot be played back
Some applications display a photo file pre-
installed in the PC simultaneously with music
playback when using the renderer function.
Depending on the pre-installed photo file, music
playback may not be possible, but may become
possible by changing the photo file.
You could not connect Internet
Check that the LAN cable or AC power cord of the
router/modem* has been connected properly.
* Your router/modem must be set in advance to
connect to the Internet. Contact your Internet
service provider for router/modem settings.
You do not have YouTube ID
If you do not have a YouTube ID and password,
register them through the address below.
http://www.google.com/device
(You can also register a YouTube ID and password
from your PC.)
After registering your ID, you can use it
immediately.
The TV turns off automatically (the TV enters
standby mode)
Check if the [Sleep Timer] is activated (page 25).
Check if the [Duration] is activated by [On Timer]
(page 24) or [Photo Frame Settings] (page 24).
Check if the [Idle TV Standby] is activated
(page 27).
Some input sources cannot be selected
Select [Video Labels] and select [Always] of the
input source (page 26).
The remote control does not function
Replace the batteries.
HDMI equipment does not appear on [BRAVIA
Sync Device List]
Check that your equipment is compatible with
BRAVIA Sync Control.
Cannot select [Off] in [BRAVIA Sync Control]
If you have connected any audio system that is
compatible with BRAVIA Sync Control, you cannot
select [Off] in this menu. To change the audio
output to the TV speaker, select [TV Speakers] in
the [Speakers] menu (page 26).
The [Parental Lock] password has been
forgotten
Enter 9999 for the PIN code.
Update PIN code by pressing
HOME
and select
[Settings]
t
[System Settings]
t
[Parental Lock]
t
[Change PIN Code].
Store Display Mode or Promoting Feature
Logo appears on the screen
On the remote control, press
RETURN
then
press
HOME
and select [Settings]
t
[System
Settings]
t
[Set-up]
t
[Auto Start-up]. Be sure
to select [Home] in [Location].
General
