13
KDL-32S5100/40S5100/46S5100
KDL-32S5100/40S5100/46S5100
SECTION 1: DISASSEMBLY
1-1. REAR COVER REMOVAL
1 Slide out Switch unit from Bezel
2 Disconnect 1 connector from HW3 Board
1 Remove 15 screws from Rear Cover
(KDL-32S5100 ONLY)
Remove 18 screws from Rear Cover
(KDL-40S5100 ONLY)
Remove 20 screws from Rear Cover
(KDL-46S5100 ONLY)
2 Remove 1 screw from Side Jack position
3 Remove 1 screw from Terminal position
4 Remove 2 screws from Rear Cover
(KDL-32S5100 ONLY)
Remove 4 screws from Rear Cover
(KDL-40/46S5100 ONLY)
5 The Rear Cover is attached to the Bezel Assembly
with three small tabs Use caution when removing
the Rear Cover to avoid damage to these tabs
1-2. SWITCH UNIT REMOVAL
1 SCREW,
+BVTP2 4X16
2 SCREW,
+BVTP 3X12 TYPE2 IT-3
4 SCREW, +PSW M4X8 (32)
SCREW, +SPW M4X12 (40/46)
Rear Cover
Bezel
Tab Inserts
3 SCREW,
+BVTP 3X12 TYPE2 IT-3
5
Bezel
Switch Unit (Contains HW3 Board)
1
2