30
SEC 2. ADJUSTMENT
HOW TO ENTERING SERVICE MODE
1) standby mode
a.Turn on the main power switch to place this set in standby mode.
b.Press the buttons on the remote commander as follows, and entering service mode.
2) power on mode
a.Turn on the main power switch to place this set in Power on mode.
b.Press the buttons on the remote commander as follows, and entering service mode.
service mode display
:
When replace Main Board or panel, please confirm "
SERIAL NUMBER
EDIT " and "MODEL NAME EDIT" in service mode.
If they are different, please select a suitable thing.
Service Mode
Wide Band Turning
>>
Range Scan…
>>
Self diagnosis history >>
Status Information
>>
LVDS Spectrum(%) <[ 29 ]>
STATUS DIGITAL RF INFORMATION >>
Low of HPD
<[ 5 ]>
Panel Selection <[ 17_LCA315XVN02 ]>
Test Reset
<[ Off
]>
UART Selection <[ Factory ]>
SERIAL NUMBER EDIT 0000001
MODEL NAME EDIT
KDL-32R330B
MHL TMDS Termination <[ 0 ]>
[</>Set[Home]Exit
KDL-32R330B/40R380B