Sony BRAVIA KDL-32EX550, I-Manual

Page: 173 / 180

i-Manual
Print Font Size
Basic Operations
Parts Description
Watching TV
Using Other Devices
Using “BRAVIA” Sync
Devices
Useful Functions
Using Internet
Using Home Network
(DLNA)
Configuring Various
Settings
Troubleshooting
How to Use Bookmarks
Top Page > Troubleshooting > Sound Symptoms
Sound Symptoms
No sound but good picture.
Audio noise.
No audio or low audio with home theater system.
Distorted sound.
No sound but good picture.
Check the volume control.
Press MUTING or VOL + button to cancel muting.
Set [Speakers] to [TV Speakers] in the [Sound] setting. If it is set to [Audio System], TV speakers do
not output sound regardless of the TV’s volume control.
When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL AUDIO OUT (OPTICAL) may
not provide an audio signal.
Audio noise.
Make sure that the antenna is connected using a 75-ohm coaxial cable.
Keep the antenna cable away from other connecting cables.
To avoid TV interference, make sure to use an undamaged antenna cable.
No audio or low audio with home theater system.
Set [Speakers] to [Audio System] in the [Sound] setting.
Set [Audio Out] to [Fixed] in the [Sound] setting.
Distorted sound.
Check the antenna/cable connection.
Keep the antenna/cable TV cable away from other connecting cables.
Keep the TV away from electrical noise sources such as cars, hair-dryers, Wi-Fi units, mobile
phones, or optical device.
When installing optional device, leave some space between the device and TV.
Perform [Fine Tune]/[AFT] to improve sound for analog reception.
Set [Audio Filter] to [Low] or [High] to improve sound for analog reception. ([Audio Filter] may not be
available depending on your region/country.)
Trademark Information List of Contents © 2012 Sony Corporation
Top of Page
173