D:\SONY
TV\2020\SY20_NX_EU_RG_111\SY20_NX_EU_RG_111\5014855111\5014855111\01GB\5014855111_
01GB.fm
master page: Right
KD-85XH90xx / 75XH92xx / 75XH90xx / 65XH92xx / 65XH90xx / 55XH92xx / 55XH90xx
5-014-855-
11
(1)
5
GB
• Be sure to use the screws supplied with the
Wall-Mount Bracket when attaching the
Wall-Mount Bracket to the TV set. The
supplied screws are designed as indicated by
illustration when measured from the attaching
surface of the Wall-Mount Bracket.
The diameter and length of the screws differ
depending on the Wall-Mount Bracket model.
Use of screws other than those supplied may
result in internal damage to the TV set or
cause it to fall, etc.
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you are
ready to attach the Table-Top Stand. Keep the
screws away from small children.
* Only on limited region/country/TV model.
1
Remove the screws from the rear of the
TV.
2
Attach the Wall-Mount Attachment
(supplied with the TV) to the rear of the
TV (to make it parallel with the wall).
Note
• If using an electric screwdriver, set the torque at
approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the Wall-Mount Attachment when
attaching them to the TV.
Use only a flat head screwdriver to install the
Wall-Mount Attachment. Use of another tool might
result in over torqueing the Wall-Mount Attachment
and damaging the TV.
VS
10 mm – 12 mm
Screw (M6)
Wall-Mount Bracket
VS
1.5 N·m
{15 kgf·cm}
GB
