D:\SONY TV\SY140142_Clover 68 (Rev-1)\4533561131_US\US03STU.fm
XBR-79X900B/65X950B/65X900B/55X900B
4-533-561-
13
(1)
14
US
2: Connecting the TV
~
•
Use an antenna cable connector no greater
than 14 mm thick.
•
When connecting the cable to the Cable/
Antenna, input finger tighten only, over
tightening the connection can damage the
TV.
•
Before moving the TV, disconnect all of the
cables connected to the TV to prevent
damaging the TV when it is moved.
•
Use an HDMI cable connector within 12 mm
(thickness) × 21 mm (width).
•
Use Sony HDMI cable with “High Speed”
indication for HDMI connection.
•
For connection with Port Replicator, refer to
the installation guide supplied with the Port
Replicator.
•
For more information on connections, refer to
the i-Manual.
Detaching the side and rear terminal
covers
The side and rear terminal covers are
factory-attached to the TV.
Before connecting cables, remove the side
and rear terminal covers.
~
•
After connecting all cables, re-attach the
side terminal cover to the TV. For the rear
terminal cover, be sure to store the removed
cover in a safe place, keeping it away from
children.
x
Shown with a Set Top Box with
HDMI connection
~
•
Connect 4K devices (4K Media Player, 4K
Set Top Box, etc.) to the HDMI IN 2 or HDMI
IN 1 jack of the TV to enjoy copyright
protected content.
•
For the FMP-X1, connect it to the HDMI IN 2
jack only (The availability depends on
region).
Side terminal cover
Rear terminal cover
900 mA MAX
5 V
900 mA MAX
5 V
Set Top Box
