Ethernet flowchart
Cannot connect with the network, cannot
update through the network
Is the LAN cable plugged in properly?
No
Plug in the LAN cable firmly
Yes
Is the LED of the hub router lit?
(LINK LED)
No
Is power supplied to the MB board?
No
To Power Supply (System) flowchart
Yes
Yes
Replace the MB board.
Are the network settings of the menu
correct?
No
Make the correct network settings.
Yes
Replace the MB board
9-14
BDP-S485
Wireless LAN Flowchart (BDP-S580/BX58 only)
Cannot connect to Wireless LAN network
Does it able to scan for Wireless network;
Wireless Setup > Scan?
No
Is the harness from Wlan moduleto CN603
is connected properly?
Yes
No
No
Yes
Does the wireless LAN router is on with
Wireless LAN enable?
Yes
No
Are the network settings for wireless LAN
is correct?
Yes
Reset network settings ; Resetting > Reset
to factory default settings > Network settings
Turn on the router and enable the wireless
LAN?
Make the correct wireless LAN network
settings
Connect the harness properly
Is the voltage of CN603 pin 4 is more than
5V
Yes
No
Yes
Replace the WLAN module
Replace the MB Board