Sony BKSM-T103, Installation Manual

Page: 10 / 16

2-2 (E)
BKSM-T103
1. Installation of Board
(1) Match the hole on the APR-30 board with the ejector
pin on the ENC board of the DSM-T1/M1.
(2) Connect the connector on the APR-30 board to the
connector on the ENC board.
n
Make sure that the connector is connected tightly.
(3) Secure the APR-30 board using the four screws (PWH
3 x 6) supplied with the BKSM-T103.
2-1. Installation of Board and Rear Panel
APR-30 board
ENC board
Hole
Ejector pin
Connector
Connector
2. Installation of Rear Panel Assembly
(1) Remove the four screws, and remove the blank panel
from the DSM-T1/M1.
n
Keep the removed blank panel and screws.
(2) Secure the ANALOG IN rear panel using the four
screws (B 3 x 6) supplied with the BKSM-T103.
n
The BKSM-T103 comes with the two varieties of the
ANALOG IN rear panel assembly. Use either of the
two panels for your purpose.
. Rear panel with 3-pin XLR connectors :
Enables 2-channel audio input.
.
Rear panel with 5-pin XLR connectors :
Enables 4-channel audio input.
APR-30 board
Ejector lever
ENC board
PWH 3 x 6
PWH 3 x 6
Blank panel
B 3 x 6
ANALOG IN rear panel
assembly
B 3
x
6