1-2 (E)
BKPF-R70
Connector panel installation
Insert the connector panel to the slot in which the main
board has been installed.
1.
Remove the two screws at the slot which the main
board has been installed and remove the blank panel.
n
Keep the removed blank panel.
fig1-04E
2.
Insert the connector panel.
3.
Secure the connector panel with the two screws
securing the blank panel.
fig1-05E
n
Do not open the slot for air-cooled effect of the
PFV-D300. Install the blank panel to a dead slot.
4.
Turn the board levers in the direction of the arrows
1
after inserting the main board to the end of the slot by
hand.
Fig1-03E
5.
Stick the slot label supplied with the optional board
onto the board lever.
6.
Install the board retainers.
7.
Install the front panel.
n
When removing the main board, turn the board levers in
the direction of the arrows
2
, and pull out the board
toward you.
1
Install
2
Remove
1
2
1
2
1
2
Board
lever
1
2
Board
lever
B 3
x
6
Blank panel
B 3
x
6
Connector panel
1-1. Installing the Board
Summary of Contents for BKPF-R70
Page 4: ......
