BKPF-L632
4. Specifications
General
Dimensions (w/h)
Main board:
267
x
77 mm
Connector panel: 33
x
85 mm
Mass
Main board:
approx. 140 g
Connector panel: approx. 100 g
Power requirements
+
5 V dc: 1.0 A (supplied from PFV-L1/L10)
Power consumption
approx. 5 W
Serial digital inputs/outputs
Channel coding
Scrambled NRZI
Transmission speed
270 Mbit/s
Amplitude/impedance
0.8 V p-p
±
10 %, 75
Z
Cable length
200 m max. (when using a recommendation cable)
Input/output return loss 15 dB or more (5 MHz to 270 MHz)
Signal format
Conforms to SMPTE 259M
4:2:2 component serial digital video signal (525/60 and 625/50 systems)
Serial digital interface
Input connectors
SDI IN connectors (BNC type) (2)
Output connectors
Active-through output connectors (BNC type) (2)
Analog outputs
Output connectors
VIDEO OUT connectors (BNC type) (6)
NTSC composite video signal (525 mode only)
1.0 V p-p, 75
Z
(incl. sync 286 mV)
(Defined with the color bars signal 100/7.5/77/7.5)
PAL composite video signal (625 mode only)
1.0 V p-p, 75
Z
(incl. sync 300 mV)
(Defined with the color bars signal 100/0/75/0)
Video characteristics
Sampling frequency
27 MHz
Digitization
10 bits (interpolating 8 bits to 10 bits.)
Bandwidth
5 MHz
Y/C phase error
20 ns or less
Signal-to-noise ratio
54 dB or more (when the lamp signal is input)
DG (Differential gain)
2 % or less
DP (Differential phase) 525 mode: 2
d
or less
625 mode: 3.5
d
or less
System delay
approx. 2
u
s
Design and specifications are subject to change without notice.
3 (E)
Summary of Contents for BKPF-L632
Page 2: ......
