Sony BKPF-300 Installation Manual Download

Page: 77 / 158

5-5

ROUTING SWITCHER SYSTEM (E)

5-1. Setting Items of the Primary Station

Operating Function Keys

[F1]

: SEARCH (To move the cursor to the desired source

name)
1.

When

[F1]

is pressed, “Please Input SOURCE

NAME =” will be displayed.

Input the source name to be retrieved.

When

[Enter]

is pressed, the cursor will move

to the desired source name.

When menu item [J] is set to the Description name
mode,

[F1]

(SEARCH) will have the following

functions.
1.

When

[F1]

is pressed, “Please Input

* * * *

NAME =” will be displayed.

Enter the Description name (within seven

characters) from the head.

When

[Enter]

is pressed, the Description name

entered will be searched.

If the desired name does not exist in the screen,

press

[F1]

again.

[F2]

: JUMP (To move the cursor to the source number)

When

[F2]

is pressed, “Please Input SOURCE

NUMBER=” will be displayed.

Input the source number to be retrieved.

When

[Enter]

is pressed, the cursor will move

to the desired number.

[F3]

: Pg Up

When

[F3]

is pressed, the screen will display the 16

lines previous to the 16 lines displayed currently.

[F4]

: Pg Dn

When

[F4]

is pressed, the screen will display the 16

lines next to the 16 lines displayed currently.

Summary of Contents for BKPF-300































































































































































Search results

Summary of Contents for BKPF-300

Reviews:

Related manuals for BKPF-300

Brands by name

Popular brands

Sony BKPF-300, Installation Manual

Search results

Summary of Contents for BKPF-300

Reviews:

Related manuals for BKPF-300

Brands by name

Popular brands