19 (E)
Attaching a viewfinder (When the
BKP-9057 is installed)
Attaching the viewfinder
For details on attaching a viewfinder, refer to the
instruction manual that came with the viewfinder.
Note
Be sure to turn the VF connector on the viewfinder
mount of the viewfinder saddle fully counterclockwise.
1
Place the viewfinder into the viewfinder mount on
the BKP-9057 so that the mounting wedge on the
bottom of the viewfinder enters the V-shaped
recess on the viewfinder mount. Make sure that
the projections on the bottom of the viewfinder are
positioned as shown in the figure below.
2
Slide the viewfinder until the viewfinder locks. It
is locked when you hear a click.
3
Turn the viewfinder counterclockwise. Then turn
the pan-locking lever counterclockwise to lock the
viewfinder.
Caution
Attach the viewfinder to the unit securely, or the
viewfinder may fall down.
Bottom of the
viewfinder
Projections
Mounting wedge
Panning base
VF connector
Panning base
