Sony BKMW-104, Installation Manual

Page: 12 / 16

1-4 (E)
BKMW-104
HIF-1B assembly
HIF-1B
assembly
Wire holder
Coaxial connectors (NC)
Coaxial cables
< Rear side >
A B
C
Wire holder
Coaxial cables
HIF-1B
assembly
BVTT3
x
6
(Supplied
accessory)
BVTT3 x 6
(Supplied accessory)
SDI/HD SDI panel assembly
SDI/HD SDI panel assembly
Blank panel
Blank panel (Supplied accessory)
Hole
Coaxial cables
For the player
(1) Affix the blank panel of the supplied accessories
onto the SDI/HD SDI panel assembly.
(2) Attach the SDI/HD SDI panel assembly to the
VTR using the four screws of the supplied acces-
sories.
9. Connect the coaxial cables (A), (B) and (C) to the
coaxial connectors of the HIF-1B assembly, and fix
them with the wire holder as shown in the figure.
BVTT3 x 6
(Supplied
accessory)
SDI/HD SDI panel assembly
Coaxial connector
converter
Hole
Red
Upper side
Lower side
Yellow
Coaxial cables
1-3. Installation Procedures
7. Route the coaxial cables of the BKMW-104’s SDI/HD
SDI panel assembly through the hole of the VTR
chassis.
8. Attach the SDI/HD SDI panel assembly.
For the recorder
(1) Attach the coaxial connector converter to the SDI/
HD SDI panel assembly using the two screws of
the supplied accessories.
n
Be sure to position the coaxial connector converter
as shown in the figure.
(2) Attach the SDI/HD SDI panel assembly to the
VTR using the four screws of the supplied acces-
sories.