Sony BKM-FW50, Operating Instructions Manual, Page: 46 / 211

16
Delete
Deletes a file or folder saved on the
memory card inserted in the unit.
The “DCIM\101MSDCF” folder is set as
the “Play file/folder name” as the factory
default.
Repeat
Select this check box if the still images or
video files are to be played back repeatedly.
Save
Saves the settings made on this screen.
Play
Starts playback of the selected file or of the
still image/video files in the folder
specified in “Play file/folder name”.
Stop
Stops still image/video playback that was
initiated by clicking the “Play” button.
PC Presentation
This screen lets you start and stop the PC
Presentation function of the BKM-FW50.
By showing the contents of the computer
desktop on the display, the PC Presentation
function allows using the display as an
external monitor for the computer.
Note
To enable use of the PC Presentation
function, UltraVNC must be installed on
the computer.
Computer Operation
UltraVNC is free software licensed under
GNU GPL.
Connect PC
Select this to enable the PC Presentation
function of the BKM-FW50. The following
items also need to be set.
IP Address:
Enter the IP address of the computer.
Enter the IP address in the following
format: “xxx.xxx.xxx.xxx” (“xxx”
represents a figure no more than three
digits)
Password:
Enter the password that was set during
the installation of UltraVNC.
PC Resolution:
Select the screen resolution of the
connected computer.
If the resolution selected here differs
from the computer’s actual resolution,
the screen will not display at the proper
size. Select a resolution so the screen
size matches the display.
Connect
Starts the PC Presentation function. When
you click this button, the desktop screen of
the computer at the specified IP address
appears on the display.
Disconnect
Select this to disable the PC Presentation
function.