6
Digital Sketch Effects
Applying a sketch effect – F1 (SKETCH) to F3 (NEGA)
Use the following procedure.
1
Press F1 (SKETCH), turning it on.
2
Press F2 (MODE), to select “SKETCH”.
The soft key indications appear as follows.
SKETCH
MODE
NEGA
SKETCH menu soft key indications (“SKETCH” mode)
3
Adjust the “Contour” parameters.
• Left knob (“Clip”): reference level for outline extraction (0
to 100%)
• Center knob (“Gain”): image gain for outline extraction
(–100 to +100%)
• Right knob (“Mix”): mix amount for input video (0 to
100%)
4
Adjust the “Chroma gain” parameters.
• Left knob (“Gain”): chroma gain of sketch image (–100 to
+100%)
5
To invert the black/white sense of the image used for outline
extraction, press F3 (NEGA).
When this is set to “ON” the outline is white, and when set to
“OFF” it is black.
Enhancing outlines – F1 (SKETCH) to F5 (EDGE HUE
ROT)
Use the following procedure.
1
Press F1 (SKETCH), turning it on.
2
Press F2 (MODE), to select “ENHANCE”.
The soft key indications appear as follows.
SKETCH
NEGA
MODE
EDGE
FLAT
EDGE
HUE ROT
SKETCH menu soft key indications (“ENHANCE” mode)
