Sony Betacam SX DNW-A65, Operation Manual

Page: 54 / 82

Chapter 6
Menu System
6-4
Chapter 6 Menu System
6-2 Basic Menu
6-2-2 Basic Menu Operations
This section describes the basic menu displays and
how to change the settings.
For information about how to use item 013, see the section
“Switching between 525/625 line systems (menu item 013)”
(page 6-6), and for information about how to use items B01
to B14, see the section “Menu bank operations (menu items
B01 to B14” (page 6-8).
Displaying the menus
Press the MENU button, turning it on.
The F FWD button and VAR button light, and the
setting of the currently selected menu item appears in
the time data display area 1 and 2.
To display the full item name
Hold down the F FWD button.
To display the item group name
Items in the menu are arranged in groups, by the 100’s
digit of the item number. To display the name of the
group to which the currently selected item belongs,
hold down the VAR button.
To display menus on the monitor
Set the CHARACTER switch on the subsidiary control
panel to ON, then press the MENU button. You can
now view the menu as shown in the following figure,
on a monitor connected to the COMPOSITE VIDEO
OUTPUT 3 (SUPER) connector or the SDI OUTPUT
3 (SUPER) connector.
MENU button
F FWD button
Item number
(flashing) Item name
(first three characters) Setting
Time data display
VAR button
Item name (all characters)
Item group name
Cursor indicating
the currently
selected item
Group name for the
currently selected
item
9 ) 0 6 p
%
*HO1:OPE HOURS - 102
HO2:DRUM HOURS - 52
HOURS METER
-
-
-
-
-
-
-