25
GB
BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W
4-485-800-
13
(1)
D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200
(PMRF 02)\4485800131_GB (CEK)\040GET.fm
masterpage:
Right
Getti
ng Started
Rear of the main unit
• Be sure to fully extend the FM wire
antenna (aerial).
• After connecting the FM wire antenna
(aerial), keep it as horizontal as possible.
If you have poor FM reception, use a
75-ohm coaxial cable (not supplied) to
connect the main unit to an outdoor FM
antenna (aerial).
Step 3: Preparing for
Network Connection
To connect the system to your network,
perform [Easy Network Settings]. For
details, see “Step 5: Performing the Easy
Setup” (page 27).
Select the method based on your LAN
(Local Area Network) environment.
• If you use a wireless LAN
The system has built-in Wi-Fi, and you
can connect the system to the network
by making the network settings.
• If you use a wired LAN
Use a LAN cable to connect to the LAN
(100) terminal on the main unit.
We recommend that you use a shielded
and straight interface cable (LAN cable).
Connecting the antenna
(aerial)
Note
Tip
FM wire antenna (aerial)
(supplied)
or
Tip
Tip
Broadband router
LAN cable (not supplied)