34
,
When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for
HDMI] function, you may be unable
to control the TV from the player.
– if you change the HDMI
connection, disconnect and
reconnect the mains lead, or a power
failure occurs, try the following:
1
Switch the input selector of the
AV amplifier (receiver) so that the
picture from the player appears on
the TV screen.
2
Set [Control for
HDMI] to [Off], then set [Control
for HDMI] to [On] (page 28). Refer
to the instruction manual supplied
with the AV amplifier (receiver).
The System Power-Off function does
not work (BRAVIA Sync).
,
Check that [Control for HDMI] and
[HDMI:Linked to TV-off] are set to
[On] (page 28).
Playback does not start from the
beginning of content.
,
Press OPTIONS, and select [Play from
start].
Playback does not start from the
resume point where you last stopped
playing.
,
The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
The disc tray does not open and
“LOCK” or “D ON” appears on the
front panel display.
,
When “LOCK” appears, the player is
locked. To cancel the Child Lock, hold
down
N
on the player until
“UNLCK” appears on the front panel
display (page 9).
,
When “D ON” appears, contact your
Sony dealer or local authorised Sony
service facility.
The disc tray does not open and you
cannot remove the disc even after you
press
Z
.
,
Try the following:
1
Turn the player
off, and disconnect the mains lead.
2
Reconnect the mains lead while
pressing down
Z
on the player.
3
Keep pressing down
Z
on the player
until the tray opens.
4
Remove the
disc.
5
When “OPEN” appears on the
front panel display, hold down
[
/
1
on
the player for more than 10 seconds
until the player turns off.
“Exxxx” or “TEMP” appears on the
front panel display.
,
When “Exxxx” appears, contact your
nearest Sony dealer or local authorised
Sony service facility and give the error
code.
,
When “TEMP” appears, place the
player in a location with adequate
ventilation to prevent heat build-up in
the player. “TEMP” will appear for a
short time.
Others