background image

1-1(E)

BC-1WD

Section 1

Operating Instructions

This section is extracted

from operation manual.

13

WARNING

To prevent fire or shock hazard, do not
expose the unit to rain or moisture

.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION :

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage’’ within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.

This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

For the customers in the USA

This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules.  These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment.  This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.  Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.

You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.

GB

English

English

 1993 Sony Corporation

3-203-445-01(1)

Operating Instructions

Page 13

GB

BC-1WD
BC-1WDCE

Battery Charger

Summary of Contents for BC-1WD



































Reviews: