So
und A
d
just
men
t/Tim
er
21
GB
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 9).
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 13).
• TAPE: Load a tape (see “Playing a tape”
• FM or AM: Tune in the preset radio
station (see “Listening to the radio” on
page 15).
2
Press /– to adjust the
volume.
3
Press CLOCK/TIMER SET.
4
Press
.
or
>
repeatedly until
“PLAY SET?” appears, then press
ENTER.
“ON TIME” appears and the hour
indication flashes.
5
Set the time to start playing.
Press
.
or
>
repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press
.
or
>
repeatedly to set the
minute, then press ENTER.
6
Set the time to stop playing following
the same procedure as step 5.
7
Press
.
or
>
repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8
Press ENTER.
“PLAY TIMER”, the start time, the stop
time and the sound source appear in turn,
then the original display returns.
9
Press
?/1
to turn off the system.
Other operations
Notes
• You cannot activate the Play Timer and Rec Timer at
the same time.
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
• If the system is on about 15 seconds before the preset
time, the Play Timer will not be activated.
• You cannot use the optional component connected to
AUX IN jacks or USB port as the sound source for
Play Timer.
Waking up to music
— Play Timer
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
T
To
Do this
Activate the timer/
check the setting
1
Press CLOCK/TIMER
SELECT.
2
Press
.
or
>
repeatedly until “SELECT
PLAY SEL?” appears, then
press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
2
Press
.
or
>
repeatedly until “SELECT
TIMER OFF?” appears, then
press ENTER.