CD/MP3
–
Pla
y
13
GB
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 18).
1
Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2
Press PLAY MODE in stop mode
repeatedly until “PGM” appears.
3
Press DISC SKIP (or DISC 1 – 5 on the
unit) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with “AL” displayed.
4
Press
.
or
>
repeatedly until the
desired track number appears.
When programming the MP3 audio tracks,
press ALBUM – or + to select album, then
press
.
or
>
repeatedly until the
desired track number appears.
5
Press ENTER (or PLAY MODE).
The track is programmed.
The step number appears, followed by the
last programmed track number.
6
Program additional discs or tracks.
7
Press
N
(or CD
NX
on the unit).
Program Play starts.
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD
(or FUNCTION repeatedly) to switch the function to
CD, then press
N
(or CD
NX
on the unit). When
you eject a disc after programming tracks from
multiple discs, only the tracks contained on the
ejected disc are deleted from the program.
• “– –.– –” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 audio track.
Creating your own
program
— Program Play
PLAY
TITLE
ID3
TRK
ALBM
AUTO
PRESET
MP3
MONO
STEREO
TUNED
TRACK
ALBUM
DISC S ALBM REP1
PGM
SHUF
TREBLE
LEVEL R
i - Bass
BASS
0
0
LEVEL L
SYNC
REC
ALL
SLEEP
REC
1
2
3
4
5
1
Selected track number
Total playing time
To program
Repeat steps
Other discs
3 and 5
Other tracks on the
same disc
4 and 5
Other tracks on
other discs
3 to 5
To
Do this
Cancel Program Play
Press PLAY MODE in
stop mode repeatedly until
“PGM” disappears.
Clear a track from the end Press CLEAR in stop
mode.
