18
GB
You can record a whole CD on a tape.
You can use TYPE I (normal) tape.
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Load a CD you want to record.
If you have already loaded the disc, press
DISC 1 – 5 to select the disc, then press
x
.
When you want to record an album from an
MP3 disc, be sure to press PLAY MODE
repeatedly to select ALBM, then use
ALBUM – or + on the remote to select the
desired album before proceeding.
3
Press CD SYNC.
“CD SYNCHRO” appears. “REC” flashes.
The tape deck stands by for recording and
the CD player pauses for play.
4
Press DIRECTION repeatedly until
g
appears to record on one side or
h
(or
j
) to record on both sides.
5
Press TAPE
nN
repeatedly to select
recording side.
If you select both sides recording or front
side recording, press TAPE
nN
to light
up the
N
indicator. If you record on the
reverse side, press TAPE
nN
again to
light up the
n
indicator.
6
Press
z
REC PAUSE/START.
Recording starts.
When the recording is completed, the CD
player and the tape deck stop automatically.
To stop recording
Press
x
.
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 2 and 3,
perform steps 1 to 6 of “Creating your own
program” (page 13).
Tip
If you select both sides recording and the tape reaches
the end of the front side part-way through a track, the
entire track is recorded again from the beginning of the
reverse side.
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording
