ILCE-7/7K/7R_L2
3-1
3. ASSEMBLY
Assembly-1:
Screw tightening sequence when assembling the
IM plate (3000)
3
1
2
IM plate (3000)
Assembly-2:
IM Adjust Washer (C) putting position
IM adjust washer (C)
IM adjust washer (C)
IM adjust washer (C)
3-1. ASSEMBLY
Assembly-3:
Method of attachment of the MB Mask Sheet
(456)
Driver
Driver
2
MB Sheet (456), Mask
MB Tape (3000),
Mask Sheet
Cabinet (F)
2
Assembly-4:
Apply grease on the MB N Plate SP
MB N Plate SP
G
G-85
(J-6082-626-A)
Assembly-5:
Screw tightening sequence when assembling the
MB N Plate A (754)
1
2
3
4
MB N Plate A (754)
Assembly-6:
Notes on Assembling the RL flexible board
AF cushion
RL-1018 flexible board
1
Attach the AF cushion to the RL-1018 flexible board.
Claws
Claws
Claws
Claw
Button C2
Menu button rubber
Flexible board
RL block
Adhesion part
Bosses
Bosses
Boss
2
Install the RL-1018 flexible board to the control switch
block (RL77900) as shown in the figure.
3
Install the button C2 and the menu button rubber, connect the
flexible board, and install the RL block.
4
Install the three screws.
Screws
