Sony alpha 3000, Instruction Manual

Page: 15 / 92

GB
15
Pr
epa
ri
ng
th
e c
am
er
a
• If the charge lamp on the camera flashes while you are charging a battery pack,
this indicates that charging is temporarily stopped because the temperature is
outside the recommended range. When the temperature gets back within the
appropriate range, the charging resumes. We recommend charging the battery
pack in an ambient temperature of between 10 °C and 30 °C (50 ºF and 86 ºF).
• If the camera is connected to a laptop computer that is not connected to a power
source, the laptop battery level decreases. Do not leave the camera connected to a
computer for an extended period of time.
• Do not turn on/off or restart the computer, or wake the computer to resume from
sleep mode when a USB connection has been established between the computer
and the camera. That may cause the camera to malfunction. Before turning on/off,
or restarting the computer or waking the computer from sleep mode, disconnect
the camera from the computer.
• We do not guarantee operation with all computers. No guarantees are made for
charging using a custom-built computer, a modified computer, or charging via a
USB hub. You may not be able to operate the camera properly, depending on the
types of USB devices you are using at the same time.
• The charge lamp may flash quickly when the battery pack is used for the first time,
or the battery pack has not been used for a long time. In such cases, remove the
battery pack and re-insert it, and then charge the battery pack.
• Do not try to charge the battery pack again right after it has been charged, or when
it has not been used after being charged. Doing so will affect the performance of
the battery pack.
• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied)
and AC Adaptor (sold separately).
Notes