Sony AITe90-UL, Operating Instructions Manual, Page: 8 / 24

8
Chapter 1 Introduction
Part Names and Functions
Front Panel
POWER
1
3 4 5 6 7
2
Figure 1-2. Front panel
1
AIT Data Cartridge Receptacle
See page 15 for information on inserting and removing a AIT data
cartridge.
2
POWER Indicator
Lights while the drive is on.
3
BUSY Indicator
Lights when data is transferred through the USB or i.LINK interface. It
also lights in the following situations:
• When reading data from or writing data to a data cartridge
• When inserting or ejecting a data cartridge
4
TAPE Indicator
When a AIT cartridge is inserted, the indicator lights. It also lights in the
following situations:
5
STATUS Indicator
Lights when the data cartridge in the drive is write-protected. It also in
the following situations:
Inserting and removing a cartridge repeated blinking (same on-off
interval).
Cartridge deteriorated alternating long-short blinking.
Drive needs cleaning repeated long on, short off blinking.
End of tape during cleaning repeated blinking (same on-off
interval).
Drive malfunction repeated short on (once or twice),
long off blinking.