89
Advanced operations
LINE OUT
L
R
AUDIO L
AUDIO R
Ç
: Signal flow
Audio equipment
A/V connecting cable
AUDIO/
VIDEO
Do not connect the
video (yellow)
plug.
Audio dubbing
Dubbing with the AUDIO/VIDEO jack
Note
The picture is not output from the AUDIO/VIDEO jack. Check the recorded picture on the
LCD screen or in the viewfinder, as well as check the recorded sound by using a speaker or
headphones.
Dubbing with the built-in microphones
No connection is necessary.
Adding an audio sound on a recorded tape
(
1
)
Insert your recorded tape into the camcorder.
(
2
)
Set the POWER switch to VTR.
(
3
)
On the camcorder, locate the point where the recording should begin by pressing
0
or
)
. Then press
P
to set it to playback pause mode.
(
4
)
Press AUDIO DUB on the Remote Commander .
(
5
)
Press
P
on the Remote Commander and at the same time start playing back the audio
you want to record.
(
6
)
Press
p
on the Remote Commander at the point where you want to stop recording.
