Sony a7 III, Instruction Manual

Page: 5 / 707

ILCE-7M3
4-732-950-41(1)
GB
5
C:\1102\4732950411ILCE7M3CEC\01GB-ILCE7M3CEC\010BEF.indd
DTP data saved: 2017/11/01 16:10
PDF file created: 2017/11/02 15:24
GB
• If the same part of your skin
touches the camera for a long
period of time while using the
camera, even if the camera does
not feel hot to you, it may cause
symptoms of a low-temperature
burn such as redness or blistering.
Pay special attention in the following
situations and use a tripod, etc.
– When using the camera in a high-
temperature environment
– When someone with poor
circulation or impaired skin
sensation uses the camera
– When using the camera with
the [Auto Pwr OFF Temp.] set to
[High].
• Especially during 4K movie
shooting, the recording time may
be shorter under low temperature
conditions. Warm up the battery
pack or replace it with a new
battery.
Notes on recording/playback
• Before you start recording, make a
trial recording to make sure that the
camera is working correctly.
• The recorded image may be
different from the image you
monitored before recording.
• Do not use the camera in areas
where strong radio waves or
radiation are being emitted.
Recording and playback may not
function correctly.
• Playback of images recorded with
your product on other equipment
and playback of images recorded
or edited with other equipment on
your product are not guaranteed.
• Sony can provide no guarantees
in the event of failure to record or
loss or damage of recorded images
or audio data due to a malfunction
of the camera or recording media,
etc. We recommend backing up
important data.
• Once you format the memory
card, all the data recorded on
the memory card will be deleted
and cannot be restored. Before
formatting, copy the data to a
computer or other device.
Notes on the Multi Interface Shoe
• When attaching or detaching
accessories such as an external
flash to the Multi Interface Shoe,
first turn the power to OFF. When
attaching the accessory, confirm
that it is firmly fastened to the
camera.
• Do not use the Multi Interface Shoe
with a commercially available flash
that applies voltages of 250 V or
more or has the opposite polarity
of the camera. It may cause a
malfunction.
Sony lenses/accessories
Using this unit with products from
other manufacturers may affect its
performance, leading to accidents or
malfunction.