Sony A230 Instruction Manual Download Page 151

Page: 151 / 162

151

For details, refer to the operating instructions supplied with the printer or
consult with the manufacturer of the printer.

A connection cannot be established.

• The camera cannot be connected directly to a printer that is not compliant

with the PictBridge standard. Consult the printer manufacturer as to
whether the printer is compliant with PictBridge or not.

• Set [USB connection] to [PTP] (page 137).
• Disconnect and connect the USB cable again. If an error message is

indicated on the printer, refer to the operating instructions supplied with the
printer.

Cannot print images.

• Check that the camera and the printer are properly connected using the USB

cable.

• RAW images cannot be printed.
• Images shot using cameras other than this camera or images modified with

a computer may not be printed.

“---- -- --” is printed on the date-inserted part of the image.

• Images that do not have the recording data/time information cannot be

printed with the date inserted. Set [Date imprint] to [Off] and print the
image again (page 139).

Cannot print the image at the size selected.

• Disconnect the USB cable and reconnect it whenever you change the paper

size after the printer has been connected to the camera.

• The print setting of the camera differs from that of the printer. Change the

setting of either the camera (page 139) or the printer.

Cannot operate the camera after canceling printing.

• Wait for a while as the printer is carrying out the cancellation. It may take

some time depending on the printer.

PictBridge compliant printer

Summary of Contents for A230



































































































































































Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands

Sony A230, Instruction Manual

Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands