HCD-GPX5G/GPX7G/GPX8G
20
[CD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position du-
rable to vibration. Use this mode when returning the set to
the customer after repair.
•
Procedure:
1.
Press
[
I/
1
STANDBY
] button to turn on the system.
2. Select CD function.
3. Press [BASS BAZUCA] button and [
I/
1
STANDBY
]
button simultaneously. The system turns off
automatically.
4.
A
message
“MECHA LOCK” is displayed on the
fl
uorescent
indicator tube and the CD ship mode is set.
[CD TRAY LOCK MODE]
• This mode let you lock the disc tray. When this mode is ac-
tivated, the disc tray will not open when [
Z
OPEN/CLOSE]
button or [EX-CHANGE] button is pressed. The message
“LOCKED” will be displayed on the
fl
uorescent indicator
tube. This mode only applied when there is disc(s) on the
tray.
•
Procedure:
1.
Press
[
I/
1
STANDBY
] button to turn on the system.
2. Select CD function.
3.
Press
[
x
] button and [ENTER] button simultane-
ously and hold down until “LOCKED” or “UN-
LOCKED” displayed on the
fl
uorescent indicator
tube (around 5 seconds).
[FACTORY PRESET]
• This mode is use to load all the factory use preset frequen-
cies into FM 1-FM 20 and AM 1-AM 10. Originally, fre-
quency of FM 1-FM 20 and AM 1-AM10 are set to the
minimum frequency.
•
Procedure:
1.
Press
[
I/
1
STANDBY
] button to turn on the system.
2. Press [CD/DISC SKIP] button and [AUDIO IN]
button simultaneously and hold for 3 seconds,
message “FACTORY” appears on the
fl
uorescent
indicator tube. The function is changed to TUNER
automatically.
[CDM AGING MODE]
• This mode is used to display the total count of meter
pointer touch initial switch and max switch.
•
Procedure:
1.
Press
[
I/
1
STANDBY
] button to turn on the system.
2. Select CD function and All DISC play mode.
3. Put discs on all trays and close the tray.
4.
Press
[
+
/
] button and [
x
] button simultane-
ously for 3 seconds.
5.
The
fl
uorescent indicator tube displays Aging
Display “AG xxxx/yyyy”.
“xxxx” represents the error counter
(Maximum Value of “xxxx” = 9999)
“yyyyy” represents the cycle counter
(Maximum Value of “yyyy” = 9999)
6.
Press [<<] or [>>] to search for Aging History
Error Display.
The
fl
uorescent indicator tube displays
“Mx
E1E2E3E4”.
x: error history number
E1: Loading sequence JCP high
E2: Loading sequence JCP low
E3: Loading operation JCP
E4: Cam position operation JCP
7.
Press [ENTER] to Aging Display
• To release from Meter Aging Mode.
To release from this mode, press [
I/
1
STANDBY
] button or
perform COLD RESET operation.
[HISTORY MODE]
• This mode is used to check important data stored in the
system when PROTECTOR happen.
•
Procedure:
1. During demo mode, press [
u
] button and [BASS
BAZUCA] for 5 seconds to mode in to history
mode.
2. Press the [] or [TUNING -] button to
check history data stored
Item
Display
Protector Count
P
R O C O U N T
Protector Type
P
R O T Y
P
E
Single Power On Time T
1
H
M
Total Power On Time T
2
H
M
Input Function
F
U N C
Volume
V O L
Actual
Attenuation
A T
T
Low EQ Level
E Q
L O W
Mid EQ Level
E Q
M
I
D
High EQ Level
E Q
H
I
G H
VACS
Level
V A C
S
AP VACS Level
A P V A C
S
Subwoofer
Setting
S W
Surround
Setting
S
U R R
DJ Effect Setting
D
J
Bass Bazuca Setting B A Z U C A
• To release from History Mode.
To release from this mode, press [
I/
1
STANDBY
] button.
[PROTECT KIND CHECK TEST MODE]
• This mode is used to check types of protect occurred during
protector on.
•
Procedure:
3. During protection on,
fl
uorescent indicator tube
shows blinking message “PROTECT EXX”.
“EXX” – represent the error code.
4.
Press
[
u
] button & [
x
] button simultaneously.
5. Fluorescent indicator tube display will toggle
between “PROTECT” message & protector kind
message display.
Bellow table explains on protector kind.
Error Code Protector Message Description
E01
"AMP OCP"
The over current condition to MOS-
FET occurs by defect of MOSFET or
defect of PS output line.
E02
"MTK POWER" No power supply to DMB mount
E03
"POWER SUPPLY" Defect of power supply circuit to AMP
E04
"AMPLIFIER"
Defect of AMP circuit
E06
"FAN BLOCK"
Defect of DC FAN and DC FAN
driver circuit
• To release from this mode.
Press
[
u
] button & [
x
] button simultaneously again or
unplug & re-plug in the power cord.
All manuals and user guides at all-guides.com
