Sony 4-127-580-13(1) Operating Instructions Manual Download Page 65

Page: 65 / 136

ICD-SX700/SX800 4-127-580-11(1)

Pla

During playback or stop, press and

hold DIVIDE/ (bookmark) at the

position you want to add a bookmark.

A bookmark is added and “ ” (bookmark)

flashes three times.

If you add a bookmark to a message that

already has a bookmark, the previously

added bookmark is deleted and a

new bookmark is added at the newly

specified point.

To start playback at the

bookmark

Press





when the IC recorder is

in the stop mode. When “ ” (bookmark)

flashes once, press



To delete the bookmark

Press and hold /MENU to enter the

menu mode.
The menu mode window will be

displayed.

Press





to select “ERASE

BOOKMARK,” then press



“ERASE BOOKMARK?” is displayed.

Press





to select “YES,” then

press



An erasing animation and “ERASING…”

will appear and the bookmark will be

deleted.

Press



(stop) to exit the menu mode.

Notes

You cannot add a bookmark on MP3, LPCM,

and WMA files.
You cannot add a bookmark at the very

beginning or at the very end of the message.





Summary of Contents for 4-127-580-13(1)









































































































































Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands

Sony 4-127-580-13(1), Operating Instructions Manual

Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands