Sony 4-127-580-13(1) Operating Instructions Manual Download Page 49

Page: 49 / 136

ICD-SX700/SX800 4-127-580-11(1)

Recording with an

External Microphone

Stereo

microphone

To the

(microphone)

jack











Tip

Before you start recording, we recommend

you make a trial recording first.

Connect an external microphone to

the



(microphone) jack when the

IC recorder is in the stop mode.

“SELECT INPUT” appears in the display

window.



Press





to select “MIC IN,”

then press



Press



(record/pause) to start

recording.

The built-in microphones are

automatically cut off.
If the input level is not strong enough,

adjust the recording level on the IC

recorder.
When a plug in power type

microphone is connected, power

is automatically supplied to the

microphone from the IC recorder.

Note

If “SELECT INPUT” is not displayed, set it in the

menu (page 89).

Recommended microphones

You can use the Sony ECM-CS10, or ECM-CZ10

electret condenser microphone (not supplied).





Summary of Contents for 4-127-580-13(1)









































































































































Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands

Sony 4-127-580-13(1), Operating Instructions Manual

Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands