Sony 4-125-572-12 (1), Operating Instructions Manual

Page: 33 / 47

33
Monitoring and Operating the Projector Using a Web Browser
U
s
in
g t
h
e N
e
tw
o
rk
F
eat
u
re
s
Time Server
Enter the address of the time server to obtain
an accurate time information automatically.
Password
You can set the name and password for
[Administrator] and for [User]. The name of
the administrator is preset to “root.”
• To change the password, enter a new
password after deleting the password
(*****) that was set.
• If you forget your password, consult
qualified Sony personnel.
Mail Report
You can use the Mail Report function to do
the following:
• Periodically report the installation status
of the projector and owner information.
You can also specify the transmission days
of e-mail messages (Regular Report).
• Immediately send e-mail if any error
occurs with the projector (Error Report)
• Notify by e-mail of the replacement timing
of the projector lamp when use of the lamp
has reached the preset time (Lamp
Reminder)
• Notify by e-mail that maintenance of the
projector is required when use of the
projector has reached the preset time
(Maintenance Reminder)
x Report Timing field
Regular Report
A report on the present status, installation
status, etc. of the projector is periodically
sent by e-mail.
Set the timing for sending e-mail messages
as follows:
AT: Specify the time when e-mail is to be
sent. You can set the time by the hour.
Every Week on Days: Check this check box
to have e-mail sent on the selected days
every week.
Mon/Tue/Wed/Thu/Fri/Sat/Sun: Specify
the days of the week when e-mail is to be
sent. You can check two or more days of
the week.
Notes