Sony 3-287-077-14(2), Operating Instructions Manual

Page: 29 / 48

29 GB
Othe
r Operations
Recording onto a tape
— CD-TAPE Synchro
Recording/Manual
Recording/Sound Mixing
You can record on a TYPE I (normal) tape
in three ways:
CD-TAPE Synchro Recording:
You can record an entire disc onto a tape.
Manual Recording:
You can record just the portions you like
from a sound source, including connected
audio components.
Sound Mixing:
You can “mix” sounds by playing one of
the components and singing or speaking
into a microphone (not supplied). The
mixed sound can be recorded onto a tape.
1
Load a recordable tape into the
tape deck with the side you want
to record facing up.
2
Prepare the recording source.
Select the source you want to record.
CD-TAPE Synchro Recording
Press CD (RM-AMU006) or press
FU/– (RM-AMU008)
repeatedly (or press CD on the unit) to
select the CD function. Load the disc
you want to record, and press DISC
SKIP repeatedly to select the disc.
To select the play mode, press PLAY
MODE repeatedly in stop mode (see
“To change the play mode” (page 17)).
To record your favorite CD tracks or
MP3 files in the order you want,
perform steps 2 to 6 of “Creating your
own program” (page 27).
Manual Recording and Sound
Mixing
To record sound from a microphone,
press CD (RM-AMU006) or press
FU/– (RM-AMU008)
repeatedly (or press CD on the unit) to
select the CD function, and do not start
playing any disc in step 3.
3
Start recording.
Press
z
and
B
on the tape deck at the
same time.
CD-TAPE Synchro Recording
The disc starts playing automatically
after 10 seconds.
Manual Recording and Sound
Mixing
Start playing the recording source.
If there is noise while recording from
the tuner, reposition the antenna to
reduce the noise.
While recording, you cannot listen to
other sources. Otherwise, recording
stops.
To stop recording
Press
x Z
on the tape deck.
Notes
• We recommend that you press
X
on the tape
deck first, then press
x Z
on the tape deck to
avoid noise being recorded when you stop
recording.
• You cannot eject the disc, select another disc,
track or file, pause playback or find a point in
the track or file during CD-TAPE Synchro
Recording.