2-2 (E)
WLL-RX50
2-2. Contents of Technical Menu
Menu item
Sub menu
Setting
Description
RS Packet Error
Display only
Displays the packet error (BER) of OFDM.
Estimated C/N
Display only
Displays the C/N value detected by the
demodulator IC (IC109/MDM-11 board).
Base Band Status
Display only
Displays the transmitting status of the WLL-CA50
side. (TS Rate, modulation format, convolution,
guard band interval, time interleave)
LCD Contrast
0 to 255
Sets the contrast of the LCD.
n
Never change the factory setting (255).
D/A Level Adjust
AFC Level
Max : 0 to 255
Sets the reference value of detecting the error
Min : 0 to 255
in the AFC IC (IC113/MDM-11 board).
n
Never change the factory setting
(Max : 103, Min : 50).
Cafe-S Bias Adj
0 to 255
Performs the bias voltage adjustment for the
input signals of the demodula tor IC.
(Refer to Section 3-5.)
factory setting : 51
Low Voltage Limit
0 to 255
Sets the reference value for detecting the low
voltage of DC IN. (Refer to Section 3-4.)
factory setting : 128
A/D Level Adjust
RF Level
Max : 0 to 255
Sets the maximum and minimum value of the
Min : 0 to 255
RF Level meter. (Refer to Section 3-6.)
D.C. Voltage
15 V : 0 to 255
Sets the reference value for detecting the power
12 V : 0 to 255
voltage of DC IN. (Refer to Section 3-3.)
PLD Version
Display only
Displays the PLD version of the MDM-11 board.
Wireless ID
Display only
Displays the serial No. of the WLL-CA50.
Default Setting
No, Yes
Select Yes to return the settings of the main
menu and “LCD Contrast” of this menu to
the factory settings.
n
For details of the main menu, refer to “Menu
Settings” of the operation manual of the unit.
