No
t fo
r C
om
me
rci
al U
se
18
Getting Started
Charging
1 Make sure that the battery is attached to the phone and
that the back cover is properly attached.
2 Connect the charger to the electrical outlet.
Connect the charger to the phone as shown in the picture.
The flash symbol on the plug must face upwards.
Disconnecting the Charger
Move the plug connected to the phone
upwards to remove it, as shown in the
picture.
Turning Your Phone On and Off
Turn your phone On by pressing and holding the power
key ( ) until your phone turns on. The phone will beep
(unless silent mode is activated). Turn your phone Off by
pressing and holding the power key until your phone
turns Off.
Making and Receiving Calls
Making Calls
1 Press the numeric keys to enter the phone number you
want to call. The number is shown in the display.
2 Press
Call
. The number you are dialing is shown in
the display while your phone accesses the wireless
network.
3 After the call is connected, the phone number that you
dialed, or the corresponding contact name, will remain
on your screen. The current time is replaced by the
call timer.
Note!
The main electrical plug may look different
depending on the electrical socket in your
country. The plug may not be used for products
other than Ericsson or Sony Ericsson chargers.
Note!
The amount of battery power indicated by your
battery icon is an estimate that may vary
depending on your charging and use patterns.
To ensure adequate power supply, keep your
battery fully charged.
1
2
a/A
PQ
RS
Note!
You can press
C
to erase one or more digits
in the display, or press and hold
C
to erase
all digits.