This is the Internet version of the user's guide. © Print only for private use.
Calling
25
Calling
Before you can make or receive any calls, you must
turn on the phone and be within range of a network.
See “Making and receiving calls” on page 5.
Making calls
1.
Enter the area code and the phone number.
2.
Press
YES
to make the call.
3.
Press
NO
to end the call.
Tip:
You can call numbers from the call list and the
phone book. See “Call list” on page 27 and “Phone
book” on page 27.
To change the earpiece volume during a call
• Slide the volume key on the side of the phone up or
down to increase or decrease the earpiece volume.
To turn off the microphone during a call
• Press and hold
until the display shows
Press
again to resume the conversation.
Note:
The microphone must be turned on to change
the earpiece volume during a call.
Automatic re-dialling
If the connection of the call failed and the display
shows
, press
YES
.
Note:
Do not hold the phone to your ear while waiting.
When the call is connected, the phone gives a loud signal.
The phone re-dials the number (up to ten times) or
until:
• The call is connected.
• You press a key or receive a call.
Note:
Automatic re-dialling is not available for
data calls.
Making international calls
1.
Press and hold
until a + sign appears in the
display.
The + replaces the international prefix number of the
country from which you are calling.
2.
Enter the country code, area code (without the leading
zero) and phone number,
YES
.