This is the Internet version of the user's guide. © Print only for private use.
5
2
Connect the USB cable connector to your phone. Press a key to view
the charging status on the screen. It takes approximately 2.5 hours to
fully charge the battery.
To remove the charger
1
Charge your battery until the battery icon indicates a full charge.
2
Tilt the USB charger connector upwards to remove it.
Note:
1
The USB cable for the new USB charger shown in the illustration (Part. B
in the new-type charger illustration) on page 4
is only intended for
charging your phone. Do not use it for transferring data
.
2
The USB cable for the USB charger shown in the illustration (Part. B
in the new-type charger illustration) is only intended for connection to the
AC adapter (Part. A in the new-type charger illustration) to charge your
phone.
It must not be used for connection to a PC. It can only be used
for charging your phone. Never use it for charging accessories
.
3
Sony Ericsson strongly recommends that you
use only
Sony Ericsson
branded original batteries, the part of power supply device in
accordance with YD/
T 1591-2006 specifications of Communications
Industry Standards of P. R. China (Part A in the new-type charger
illustration) and the USB cable supplied with your phone to charge the
phone
. The use of third-party products may decrease the performance
of your phone and/or pose a risk to your health or safety.
