Sony Ericsson P990i, Working Instruction, Mechanical

Page: 10 / 62

Working Instruction , Mechanical
3/000 21-1/FEA 209 544/97 A
©
Sony Ericsson Mobile Communications AB
10(62)
2.1.4 Cabinet Lower Sub asm
Remove the two top screws by using torx bit no. 6.
R
EMOVED SCREWS CAN BE REUSED IF THEY ARE NOT
DAMAGED
!
Remove the four inside screws by using torx bit no. 6.
R
EMOVED SCREWS
1 & 2
CANNOT BE REUSED AND MUST BE
SCRAPPED
!
R
EMOVED SCREWS
3 & 4
CAN BE REUSED IF THEY ARE NOT
DAMAGED
!
T
HE CAMERA LID MUST BE OPEN WHEN THE CABINET LOWER
SUB IS REMOVED FROM THE PHONE
.
Open the camera lid with your fingers.
Gently but firmly move the guitar pick along the gap
(starting where the gap is widest) both ways until the
cabinet lower sub is loose on this side.
The snap hook to be released is located at the position of
the black arrow.