This is the Internet version of the user's guide. © Print only for private use.
7
Using your MMV-200
Overview
Please refer to the description on page 3.
Supported formats
• Still picture: JPEG, BMP, GIF (87a & 89a,
not animated).
• Sound: AMR (sounds recorded by phone,
maximum size of 30 KB), MP3 (up to 128
Kbps bit rate, 44 kHz and 16-bit stereo
sampling rate), WAV, SBC, MP4 (AAC and
M4A).
• Video: MP4 (MPEG4 and AAC), 3GP
(H.263 and AMR), MPEG1. Supported
video codings: MPEG-4 Simple Visual
Profile Level 0, H.263 Profile 0 Level 10,
H.263 Profile 3 Level 10.
Using your MMV-200
To get started
1
Connect the MMV-200 to a TV or a projector,
using the RCA cable, and if needed, the
SCART adapter. You can attach the audio
connectors (red and white) to a separate stereo
amplifier. You can view media on a computer
monitor, using a VGA cable for connection.
2
Connect the Standard Charger CST-20 to
the MMV-200 and to a power source.
The Standard Charger should remain
connected at all times.
3
To turn on the MMV-200, press and hold
for a few seconds.
4
A start-up screen is displayed on the connected
TV. If prompted, select your preferred
language, using the navigation buttons on the
MMV-200. You are ready to start sharing
pictures, music and video.
picture
music
video (only from a memory card)
Bluetooth connection
cable connection
If no picture is displayed, you might have to switch to
the AV channel on the TV. Check the setting of the
PAL/NTSC/SECAM three-way switch. Please refer to
your TV user guide to find the correct video standard.
