K800 - K810
1202-3085 rev. 2
APPENDIX
A
P
P
E
NDIX
SI-K800/K790 Problem with front spare part
Background:
We have seen some cases of cosmetic gap problems reported on the spare part front. The cause to the problems is
that some of the hooks in the K800/K790 spare part front have unhooked during transport.
This has not been seen in production since the front is not transported or stored there.
In order to avoid having to reassemble the phone if there is a problem and securing the quality, please follow the
instructions below.
Instruction:
You should always fi rst ensure that the 6 hooks (3 on each side) are in place before assembly by gently pushing them
with a blunt plastic tool.
After the hooks are in place they will stay there locked in place by the other components in the phone.
Reference number:
15129-59878
Created:
2007-02-26
Author:
Patrik Cesar ([email protected])
SI-K800/K790 Problem with On/Off button
Background:
In our scrap analyze we have seen a few cases where the on / off button is stuck in the down position. The unit then starts
directly and the other keys do not work. In W642 there was done an improvement in production regarding the on/off key.
Recommendation:
If the K790 or K800 is produced before 06W42 and you are opening the unit due to other mechanical and electrical
problems, the on / off button shall be replaced at the same time.
Reference number:
15168-60144
Created:
2007-03-13
Author:
Patrik Cesar ([email protected])
SI Problem with Front Spare Part - Problem with On/Off Button
SEMC Electrical Repair Manual
117
(121)
Summary of Contents for K800
Page 122: ...www s manuals com ...
