Working Instruction
,
Mechanical
3/000 21-1/FEA 209 544/122 A
Company Internal
©
Sony Ericsson Mobile Communications AB
53(62)
3.28 KRH Label
Follow the 2.1.1 Disassembly instructions!
•
Read the old label and/or write the information into the
“Label make” program before removal
•
Note the position of the label before removal
•
Heat up the label by using hot air, if needed
•
Carefully remove the label without causing scratches
•
If there still are residues, clean the surface with isopropyl
alcohol
•
Check that the proper label format is loaded in the Zebra
printer
•
Write a new label by using the program “Label make”
and check that the printing is OK
•
Take the new label and place it onto the frame as in the
adjacent picture
O
NE LABEL ONLY IS ALLOWED
!
Follow the 4.1.5 Reassembly instructions!
Download free service manual at http://ponsel1.blogspot.com
