manualshive.com logo in svg

Sony Ericsson G90, Working Instruction, Mechanical, Page: 44 / 53

Share
Download
Sony Ericsson G90 Working Instruction, Mechanical Download Page 44

 
 
 
 
 

Working Instruction

, 

Mechanical

 

 

1210-5420      Rev1 

44(53) 

 

 
 

3.41 KRH Label 

Follow the 2.1.1 Disassembly instructions! 

 

•

  Read the old label and/or write the information into the    

“Label make” program before removal 

•

  Note the position of the label before removal 

•

  Heat up the label by using hot air, if needed 

•

  Carefully remove the label without causing scratches 

•

  If there still are residues, clean the surface with isopropyl   

alcohol  

•

  Check that the proper label format is loaded in the Zebra   

printer 

•

  Write a new label by using the program “Label make” 

and check that the printing is OK 

•

  Take the new label and place it onto the frame as in the    

adjacent picture 

 

 

O

NE LABEL ONLY IS ALLOWED

!

 

 

 

Follow the 4.1.6 Reassembly instructions! 

 

 

4 Reassembly 

After replacing a part being listed in Replacements, the instruction of that section usually ends by 
directing you to this Reassembly section with a specification of the instructions you have to carry out 
in order to reassemble the phone. 

Company Internal 

©

 Sony Ericsson Mobile Communications AB 

 

Summary of Contents for G90






















































Reviews:

No comments