background image

 

Dual SIM connection 

 
 
 

LZT 123 7676 R1A

 

 

1 Introduction 

 

The SIM card provides the identity of a particular subscriber to the GSM 
operator network.  The network operator provides a set of services to the 
subscriber based on his/her identity. 

As a result of the varying costs, services, and cell coverage of different 
GSM operators it may be beneficial to have a choice of GSM operator 
network at the time of making or receiving a call.  This can be achieved in 
a system which actively selects which one of two SIM cards to activate 
before attaching to a network. 

This application note provides the design of one such “Dual SIM” system 
when used in conjunction with a GR47 GSM module from Sony Ericsson. 

 

2 Design 

Overview 

 

The SIM connection signals from the GR47 GSM module consist of: 

 

SIGNAL 

DESCRIPTION 

SIMVCC 

3V or 5V Supply 

GND System 

Ground 

SIMCLK 

Synchronous Clock Output 

SIMRST Reset 

Output 

SIMDATA 

SIM Data Input/Output 

SIMPRESENCE 

SIM Presence Detection Input 

 

Each of the output signals and the supply connections can be connected 
directly to both SIM holders.  With a little signal conditioning these signals 
have enough drive to fan out to two SIM holders without need for signal 
buffering.  For signal conditioning each SIM holder has a supply 
decoupling capacitor associated with it. 

The SIMDATA data input/output signal is the key to successful SIM 
access.  When active, the SIMDATA signal is pulled-up by the GR47.  The 
signal is bidirectional and is pulled-down by whichever side is sending 
data.  In the case of the disabled SIM holder in our dual SIM solution the 
unused SIMDATA must be pulled-up to SIMVCC.  This is a standard idle 
condition for a SIM.   

The method we have used to redirect the SIMDATA signal to whichever 
SIM has been actively selected is by a dual SPST analogue switch. 

The dual SPST analogue switch is part number NLAS325 from “ON 
Semiconductor™”.  This part has a wide operating voltage range and very 
low quiescent supply current.  In addition it has two independent switch 
enable controls, ideally suited to this application as one is active high, the 

Reviews: