Test Instructions (mech)
1246-9251
Rev 1
©
Sony Ericsson Mobile Communications AB – Company Internal
14(17)
Tests
2.3 Manual
Tests
2.3.1 SIM
Verify that the phone can detect a SIM card:
•
insert a SIM card, install a battery and start the phone
•
if the SIM card is detected by the phone, the start-up
procedure will continue
•
if not detected, the message ‘Insert SIM card’ will be
displayed
Sony Ericsson
Insert SIM
2.3.2 Battery
charging
2.3.2.1 Charging by wall charger
Verify that charging of the phone functions properly:
•
install a battery but do not start the phone
•
connect a wall charger to the Micro USB Connector
•
verify that the display shows that the phone is being
charged
•
remove the charger from the Micro USB Connector and
verify that the display no longer indicates charging
Sony Ericsson
Charging
2.3.2.2 Charging via USB
Verify that the phone can charge the battery via a USB port:
Ensure that no computer application, such as PC Suite
or Emma, is active!
•
check and, if necessary, activate the USB charging by
entering the Service menu:
Service settings
Ö
USB
Charging on
•
install a battery but do not start the phone
•
connect a USB cable from a computer to the Micro USB
Connector
•
verify that the display shows that the phone is being
charged
•
remove the USB cable from the Micro USB Connector
and verify that the display no longer indicates charging
Sony Ericsson
Phone ready to be used
With computer
