TIME TEXTURES
MANUAL
24
7.2 Using LFO
TIME TEXTURES provides two separate LFOs so that each of the two Emitters can be modulated independ-
ently. Four LFO waveforms that can be applied to different parameters of the equalizer and to the gain slider
offer extensive modulation possibilities for your textures. If the LFO is switched on, a small dot is displayed
next to the title of the LFO page which becomes larger and smaller with the configured frequency of the LFO.
(1) LFO On/Off
: Enables/Disables the LFO. Once bypassed, all controls of the effect are grayed out. To reacti-
vate it, you can either press the On/Off button again or simply click on the disabled area.
(2) Freq
: Sets the oscillation frequency of the LFO. This parameter can be synchronized with your hosts’ clock.
(3) LFO Amount
: Adjusts the intensity of the LFO modulating your target Modulation Destination.
(4) Modulation Destination
: Choose which destination the LFO shell modulates. You can choose between the
following destinations: Emitter Gain, EQ Lo Freq, EQ Mid Freq, EQ Hi Freq, EQ Lo Gain, EQ Mid Gain and EQ Hi
Gain.
(5) Waveform Type
: You can change the waveform of the LFO. Choose between Sine, Rectangle, Triangle, and
Sawtooth.
1
2
3
4
5
Summary of Contents for TIME TEXTURES
Page 1: ...MANUAL TIME TEXTURES...